Built with Volusion
Visit our location!
150 Riberia Street
St. Augustine, FL 32085
Phone: (904) 829-2271

Check us out on
Facebook!









Home > Hoses > Rubber Exhaust/Water
Sort By:
Page of 1
Trident Flex Marine Wet Exhaust Water Hose #250/100 (cut)
Trident Flex Marine Wet Exhaust Water Hose #250/100 (cut)
per foot

Premium wet exhaust hose for longer bent connections. In smaller I.D.'s for engine intake, critical water, drain, scupper bilge and sanitation uses. Extra heavy tube and cover with helix between 2 ply reinforcement provides excellent flexibility and bend radius. Resists heat, ozone, exhaust, sani chemicals, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds. Black High Temp EDPM Rubber 250°F (121°C).
Trident Corrugated Marine Wet Exhaust Hose #252 (cut)
Trident Corrugated Marine Wet Exhaust Hose #252 (cut)
per foot

Premium corrugated marine wet exhaust hose for longer connections with substantial bends. Thick tube and cover with helix between 2 ply reinforcement. Exceptional flexibility and bend radius. Resists heat, ozone, exhaust fumes, panting and collapse. Exceeds New (SAE J2006, ABYC and NMMA) Stds.** (see below). Black High Temp EDPM Rubber 250°F (121°C).
Trident Ply Marine Wet Exhaust Water Hose #200/110 (cut)
Trident Ply Marine Wet Exhaust Water Hose #200/110 (cut)
per foot

Premium marine wet exhaust hose for short, straight connections. In smaller I.D.'s for critical engine coolant & circulation, heat exchanger and discharge uses. Extra heavy tube and cover with 2 to 6 ply reinforcement resists heat, aging, ozone, exhaust and sani chemicals. Exceeds New (SAE J2006, ABYC and NMMA) Stds. Black High Temp EDPM Rubber 250°F (121°C).
Trident  Rubber Heater Hose #130 (cut)
Trident Rubber Heater Hose #130 (cut)
per foot

Ultimate Silicone Heater Hose- Very Hi Temp Blue with Red Tube provides much greater temperature range and service life (up to 6 times longer) than standard EDPM rubber #130 Heater Hose. 2 spiral polyester reinforced with similiar working pressure for engine coolant water, A/C and other mid-pressure water applications. #130 (Standard Black): 50PSI (0.34Mpa) WP 212°F (100°C) SAE J20R3.
Trident  Rubber Heater Hose #130 (uncut)
Trident Rubber Heater Hose #130 (uncut)
per foot

Ultimate Silicone Heater Hose- Very Hi Temp Blue with Red Tube provides much greater temperature range and service life (up to 6 times longer) than standard EDPM rubber #130 Heater Hose. 2 spiral polyester reinforced with similiar working pressure for engine coolant water, A/C and other mid-pressure water applications. #130 (Standard Black): 50PSI (0.34Mpa) WP 212°F (100°C) SAE J20R3.
Trident HD Rubber Heater Hose #132 (cut)
Trident HD Rubber Heater Hose #132 (cut)
per foot

Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized applications (water & air delivery).
#132: 2 spiral, 200PSI (1.38Mpa) WP.
Trident HD Rubber Heater Hose #132 (uncut)
Trident HD Rubber Heater Hose #132 (uncut)
per foot

Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized applications (water & air delivery).
#132: 2 spiral, 200PSI (1.38Mpa) WP.
Trident X HD Water/Heater Hose  #134 (cut)
Trident X HD Water/Heater Hose #134 (cut)
per foot

Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized applications (water & air delivery).
#134: 4 spiral, heavy wall and better bend radius and working pressure - 300PSI (2.1Mpa) WP. Operating temperature -40° to 212°F (-40° to 100°C). #134 serves below water line intake and discharge applications (A/C, Eng, Sani) etc.
Trident X HD Water/Heater Hose  #134 (uncut)
Trident X HD Water/Heater Hose #134 (uncut)
per foot

Cost effective, Hi Temp, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Both are resistant to coolants, ozone, cold & heat; and serve a variety of boat and plant pressurized applications (water & air delivery).
#132: 2 spiral, 200PSI (1.38Mpa) WP.